Profile Information
This strut channel roll forming machine is designed to continuously produce ribbed strut channels with post-forming bottom punching and stop-to-cut operation. Its wall-panel forming structure and chain-driven system provide stable profile forming, while the integrated hydraulic punching unit creates accurate bottom holes after forming.
Typical Applications
| Pipe Rack Support Systems | Electrical Cable Tray Support |
| HVAC Duct Support Systems | Seismic Bracing Systems |
Profile Specification
| Profile | Strut Channel, Galvanized Strut, Unistrut Channel, C Channel, and Slotted Channel |
| Common Material | Galvanized steel / Stainless steel |
| Yield Strength | 235-345Mpa |
| Thickness | 1.5 – 2.5 mm |
| Dimension | Width1-5/8″ x Height 1-5/8″, 3-1/4″, customizable |
| Profile Features | Serrated Edges |
| Reinforcing Ribs | |
| Pre-Punched Holes |
Standard Dimension
| mm | Inch |
| 21×10 | 13/16×13/32″ |
| 21×21 | 13/16×13/16″ |
| 41×21 | 1-5/8×13/16″ |
| 41×22 | 1-5/8X7/8″ |
| 41×25 | 1-5/8×1″ |
| 41×41 | 1-5/8×1-5/8″ |
| 41×62 | 1-5/8×2-7/16″ |
| 41×82 | 1-5/8X3-1/4″ |
| Customizable | |
Production Line
The Strut Channel Roll Forming Machine is a highly automated production line designed to continuously form ribbed strut channels with serrated edges. It integrates precision punching, guided forming, synchronized flying hydraulic cutting, and rigid gearbox-driven forming for consistent profiles and efficient high-volume production.
Flow Chart
Decoiler → Guiding → Roll forming machine → Hydraulic punch → Hydraulic cut → Out table
Factory Live Test Video 🎯
Prior to shipment, every Goalon roll forming machine undergoes strict trial testing. Below is the live footage of our roll forming production line under continuous operation.
Why Choose This Roll Forming Production Line
✅ Post-Forming Bottom Punching
Punches bottom holes after forming, avoiding pre-punch deformation and simplifying tooling for fixed hole patterns.
✅ Cost-Efficient Stop-to-Cut
The forming line stops only during cutting and punching, providing practical production performance without the cost of tracking systems.
✅ Ribbed Profile Stability
Wall-panel construction and chain drive provide controlled forming for ribbed channels, helping maintain consistent profile dimensions through progressive forming.
Machine Details 🎯
Function Of Machines
Decoiler
The decoiler unwinds the steel coil and continuously supplies strip material to the forming section. Its capacity and expansion range are selected according to coil weight, width, and material specifications.
Guiding System
The guiding system aligns the incoming strip before forming, helping maintain consistent material positioning and reducing lateral deviation. Accurate guiding is important for stable rib formation and dimensional consistency.
♦ Strut Channel Roll Forming Machine
The wall-panel roll forming machine uses a chain-driven transmission system to progressively shape the strip into the required ribbed strut channel profile. The forming stands are configured according to the profile drawing and material properties.
♦ Hydraulic Punching Machine
The hydraulic punching unit is integrated with the forming machine and performs post-forming punching. It is designed for bottom holes only. The forming line stops during punching to prevent profile movement and maintain hole-position accuracy.
♦ Hydraulic Cut
The hydraulic cut-out table uses stop-to-cut operation to separate finished strut channels after forming. The roll forming section pauses during cutting, keeping the profile stationary and helping maintain the required cutting length.
Optional Upgrade ——Flying Punch&Cut
Machine Photos
Specifications Of This Roll Forming Production Line
| Component | Specification | Details |
| Decoiler | Type | Manual |
| Capacity | 5T | |
| Coil Width | Max. 500mm | |
| Expanding Range | 460–520mm | |
| Roll Forming Machine | Station Number | 23 Stands |
| Roller Material | GCr15, HRC 58–62° heat treatment | |
| Shaft Diameter & Material | 76mm solid shaft, 40Cr heat treatment | |
| Frame Structure | Wall panel structure | |
| Driving System | Chain transmission | |
| Formable Thickness | 1.5–2.5mm | |
| Hydraulic punching | Hole Types | blong Holes, customizable |
| Hole Position | According to Profile Drawing | |
| Die Material | Cr12MoV / SKD11 | |
| Die Hardness | HRC 58–62 | |
| Type | Stop to punch | |
| Cutting Device | Type | Hydraulic |
| Power | 5.5kw | |
| Blade Material | Cr12MoV | |
| Cutting Mode | Formed profile blade mold | |
| Operation Mode | Stop to cut | |
| PLC Control Cabinet | PLC | SIEMENS |
| HMI touch screen | MCGS/SIEMENS/Schneider | |
| Encoder | OMRON | |
| Language | Customizable language touch screen | |
| Functionality | Speed, length, and quantity preset with material position feedback | |
| Production Line | Total Power | Around 40kw |
| Forming Speed | 15 m/min | |
| Line Dimension | LWH 27 × 2.5 × 1.7m | |
| Machine Weight | 20 Ton | |
| Operator Needed | 1–2 persons |
This strut channel roll forming machine handles 1.5–2.5 mm material at 15 m/min, using 23 forming stands, 76 mm solid 40Cr shafts, and GCr15 rollers hardened to HRC 58–62. A 5T manual decoiler, post-forming hydraulic punching, stop-to-cut system, and Siemens PLC support reliable production with around 40 kW total power and 1–2 operators.
Customizable Roll Forming Solutions
Our Post-Punching Ribbed Strut Channel Roll Forming Machine is customized for your specific strut channel profile, including channel dimensions, rib pattern, serrated edges, material thickness, and punching layout.
The forming stations, tooling, punching system, cutting length, and line speed are configured according to your profile drawings. Manual changeover allows practical production of different strut channel sizes for electrical supports, HVAC systems, piping, solar mounting, and construction applications.
| Material | Thickness | Production speed | Automation level |
| Perforation | Embossing | Cutting | Machine color |
| One machine for multiple profile sizes | …… | ||
Comprehensive Services & Support
Safety Designs
Optional safety covers are available to protect operators from moving components while improving workplace safety and compliance.
Warranty
2-year warranty with lifetime technical support and after-sales service.
Professional Packing
Machines are packed in plastic film and labeled for easy identification and assembly, and secured inside the container with steel cables.
Installation Guide
Besides paid on-site installation and training services, we provide installation and operation manuals, along with operation videos before shipment for guidance.
Roll Forming Machines Delivered Worldwide
From our factory to customers across the globe.
Our roll forming machines have been successfully delivered to customers across multiple countries and industries, including construction, storage systems, solar mounting, and steel fabrication.
Each project reflects our engineering expertise, manufacturing capability, and commitment to providing reliable metal forming solutions for long-term customer success.
Frequently Asked Question
The machine can be customized for ribbed strut channels with serrated edges, different profile dimensions, hole patterns, material thicknesses, and required production specifications.
Flying hydraulic cutting allows the cutter to move synchronously with the formed profile, so roll forming can continue during cutting instead of stopping for every cut.
Yes. The hydraulic punching system can be configured according to hole size, spacing, quantity, position, and customer-specific punching patterns required for installation.
There is no need to worry. Our machines are designed for easy installation and operation.
Before shipment, we will finish the main assembly and testing in our factory. When the machine arrives, you only need to place it in position, connect the power supply, and it can start working.
We will also provide:
detailed installation and operation manuals
machine layout drawings
wiring diagrams
online technical support (video call / photos / videos)
If needed, we can also arrange an engineer to come to your factory to help with installation and training. Many of our customers complete installation smoothly with our online guidance.
30% deposit is paid before production, the balance paid after inspection confrmation, before shipment.
