Profil-Informationen
Scaffold planks are formed metal walking platforms with reinforced profiles and embossed surfaces, providing a stable, slip-resistant surface for scaffolding, stairs, walkways, and temporary access platforms.
Typically made from galvanized or mild steel, they are also used in workshops and industrial areas where slip resistance and easy cleaning are important. They are commonly manufactured with a dedicated scaffold plank roll forming machine.
Typische Anwendungsbereiche
| Pipe Rack Support Systems | Electrical Cable Tray Support |
| HVAC Duct Support Systems | Seismic Bracing Systems |
Profilangaben
| Profil | Strut Channel, Galvanized Strut, Unistrut Channel, C Channel, and Slotted Channel |
| Gängiges Material | Galvanized steel / Stainless steel |
| Streckgrenze | 235-345Mpa |
| Dicke | 1.5 – 2.5 mm |
| Dimension | Width1-5/8″ x Height 1-5/8″, 3-1/4″, customizable |
| Profilfunktionen | Serrated Edges |
| Reinforcing Ribs | |
| Pre-Punched Holes |
Standard Dimension
| mm | Inch |
| 21×10 | 13/16×13/32″ |
| 21×21 | 13/16×13/16″ |
| 41×21 | 1-5/8×13/16″ |
| 41×22 | 1-5/8X7/8″ |
| 41×25 | 1-5/8×1″ |
| 41×41 | 1-5/8×1-5/8″ |
| 41×62 | 1-5/8×2-7/16″ |
| 41×82 | 1-5/8X3-1/4″ |
| Anpassbar | |
Produktionslinie
This strut channel roll forming machine is engineered for manufacturers prioritizing accurate punching and rigid, stable forming over maximum line speed. The integrated line combines leveling, punching, guided feeding, gearbox-driven forming, and hydraulic cut-off, achieving up to 15 m/min with stop-to-cut operation.
Flussdiagramm
Decoiler with leveler→ Punch press → Guiding → Roll forming machine → Hydraulic cut → Out table
Live-Testvideo aus der Fabrik 🎯
Prior to shipment, every Goalon roll forming machine undergoes strict trial testing. Below is the live footage of our roll forming production line under continuous operation.
Warum sollten Sie sich für diese Rollform-Produktionslinie entscheiden?
✅ Precision Punching Before Forming
Pre-forming punching keeps hole positions stable, reducing deformation risks and avoiding secondary drilling after forming.
✅ Rigid Forming for Consistent Profiles
Cast-iron stands and gearbox drive provide rigid forming support, helping maintain channel geometry during continuous production.
✅ 15 m/min Without High-Speed Cutting
Stop-to-cut operation still delivers up to 15 m/min, balancing practical output with lower cutting-system complexity and cost.
✅ For customers who prioritize punching accuracy and robust forming performance, we recommend this configuration.
Maschinendetails 🎯
Funktion von Maschinen
Decoiler & Leveler
The decoiler and leveler continuously unwind the steel coil and correct material flatness before punching. This helps provide stable strip feeding, reducing material deviation and improving dimensional consistency throughout the strut channel roll forming machine.
♦ Punch Press
The punch press creates the required holes or slots before forming, allowing accurate positioning according to the customer’s profile drawing. Its robust punching capacity makes the line suitable for customers who place high importance on hole accuracy and repeatability.
Führung
The guiding system keeps the punched strip correctly aligned before entering the forming section. Proper strip positioning helps prevent lateral deviation, protects the forming tooling, and supports consistent profile geometry during continuous production.
♦ Roll Forming Machine
The roll forming section progressively bends the punched strip into the required strut channel profile. Cast-iron stands and a gearbox driving system provide rigid support and stable power transmission for consistent forming performance.
♦ Hydraulic Cut
The hydraulic cut-out table cuts the formed strut channel to the programmed length. This version uses stop-to-cut operation, where forming pauses during cutting to prevent profile movement and maintain reliable cutting accuracy.
Optional Upgrade ——High Speed Flying Cut
| Cutting Method | Stop-to-Cut | Flying Cut |
| Cutting Principle | Forming stops during cutting | Cutter synchronizes with forming |
| Produktionsgeschwindigkeit | Up to 15 m/min | Higher speed available |
| Production Volume | Suitable for moderate output | Suitable for high output |
| Main Advantage | Simpler and cost-effective | Continuous, higher-speed production |
| Empfohlen für | Customers allocating more budget to punching and forming performance | Customers requiring higher production capacity |
Fotos der Maschine
Technische Daten dieser Profilier-Produktionslinie
| Komponente | Spezifikation | Details |
| Abwickelvorrichtung | Typ | Hydraulik |
| Kapazität | 5T | |
| Coil Width | Max. 500mm | |
| Erweitertes Angebot | 460–520mm | |
| Nivellierer | Typ | 3 upper + 4 lower leveling rollers |
| Walze Material | 40Cr steel, heat treated | |
| Stanzpresse | Hole Types | Oblong holes, customizable |
| Hole Position | According to profile drawing | |
| Die Material | Cr12MoV / SKD11 | |
| Die Hardness | HRC 58–62 | |
| Synchronization | Servo feeding & punching synchronization | |
| Walzprofiliermaschine | Stationsnummer | 23 Stands |
| Walze Material | GCr15, HRC 58–62° heat treatment | |
| Shaft Diameter & Material | 76mm solid shaft, 40Cr heat treatment | |
| Rahmenstruktur | Ständer aus Gusseisen | |
| Antriebssystem | Getriebe | |
| Formable Thickness | 1.5–2.5mm | |
| Schneidevorrichtung | Typ | Hydraulik |
| Leistung | 5.5kw | |
| Klingenmaterial | Cr12MoV | |
| Schneidemodus | Formed profile blade mold | |
| Operation Mode | Stop to cut | |
| PLC-Schaltschrank | SPS | SIEMENS |
| HMI-Touchscreen | MCGS/SIEMENS/Schneider | |
| Geber | OMRON | |
| Language | Customizable language touch screen | |
| Functionality | Speed, length, and quantity preset with material position feedback | |
| Produktionslinie | Gesamtleistung | Around 40kw |
| Formgeschwindigkeit | 15-20 m/min | |
| Line Dimension | LWH 27 × 2.5 × 1.7m | |
| Machine Weight | 20 Ton | |
| Operator benötigt | 1–2 Personen |
This strut channel roll forming machine features a 5T hydraulic decoiler, servo-synchronized punching, 23 forming stands with GCr15 rollers and 76mm solid shafts, plus a gearbox drive and non-stop hydraulic cutting. Designed for 1.5–2.5mm material, it runs at 15–20 m/min with Siemens PLC control and requires only 1–2 operators.
Customizable Roll Forming Solutions
Our Heavy-Duty Strut Channel Roll Forming Machine with Punch Press is customized for your specific strut channel profile, including channel dimensions, rib pattern, serrated edges, material thickness, and punching layout.
The forming stations, tooling, punching system, cutting length, and line speed are configured according to your profile drawings. Manual changeover allows practical production of different strut channel sizes for electrical supports, HVAC systems, piping, solar mounting, and construction applications.
| Material | Dicke | Produktionsgeschwindigkeit | Automatisierungsgrad |
| Perforation | Prägung | Schneiden | Maschinenfarbe |
| Eine Maschine für mehrere Profilgrößen | …… | ||
Umfassende Dienstleistungen und Support
Sicherheitskonzepte
Es sind optionale Schutzabdeckungen erhältlich, die das Bedienpersonal vor beweglichen Bauteilen schützen und gleichzeitig die Sicherheit am Arbeitsplatz sowie die Einhaltung gesetzlicher Vorschriften verbessern.
Garantie
2 Jahre Garantie mit lebenslangem technischem Support und Kundendienst.
Professionell verpacken
Die Maschinen sind in Plastikfolie verpackt und zur einfachen Identifizierung und Montage beschriftet und im Container mit Stahlseilen gesichert.
Installationsanleitung
Neben kostenpflichtigen Installations- und Schulungsleistungen vor Ort stellen wir Ihnen vor dem Versand Installations- und Bedienungsanleitungen sowie Anleitungsvideos zur Verfügung.
Profiliermaschinen werden weltweit geliefert
Von unserem Werk zu Kunden auf der ganzen Welt.
Unsere Profiliermaschinen wurden bereits erfolgreich an Kunden in zahlreichen Ländern und Branchen geliefert, darunter im Bauwesen, im Bereich Lagersysteme, bei Solaranlagen und in der Stahlverarbeitung.
Jedes Projekt spiegelt unsere technische Kompetenz, unsere Fertigungskapazitäten und unser Engagement wider, zuverlässige Lösungen im Bereich der Metallumformung anzubieten, die den langfristigen Erfolg unserer Kunden sichern.
Häufig gestellte Fragen
The machine can be customized for ribbed strut channels with serrated edges, different profile dimensions, hole patterns, material thicknesses, and required production specifications.
Flying hydraulic cutting allows the cutter to move synchronously with the formed profile, so roll forming can continue during cutting instead of stopping for every cut.
Yes. The hydraulic punching system can be configured according to hole size, spacing, quantity, position, and customer-specific punching patterns required for installation.
Yes. The line integrates automated feeding, leveling, punching, forming, synchronized flying cutting, and programmed control to reduce manual intervention and improve production consistency.
Es gibt keinen Grund zur Sorge. Unsere Maschinen sind für eine einfache Installation und Bedienung konzipiert.
Vor dem Versand werden wir die Hauptmontage und die Tests in unserem Werk abschließen. Wenn die Maschine bei Ihnen eintrifft, müssen Sie sie nur noch in Position bringen, die Stromversorgung anschließen und sie kann in Betrieb gehen.
Wir stellen auch zur Verfügung:
ausführliche Installations- und Betriebsanleitungen
Maschinen-Layout-Zeichnungen
Verdrahtungsschemata
technische Online-Unterstützung (Videoanruf / Fotos / Videos)
Bei Bedarf können wir auch einen Techniker organisieren, der in Ihr Werk kommt, um bei der Installation und Schulung zu helfen. Viele unserer Kunden schließen die Installation mit Hilfe unserer Online-Anleitung reibungslos ab.
30% Anzahlung wird vor der Produktion, der Restbetrag nach Inspektion confrmation, vor dem Versand bezahlt.
